Desktop PCB Router Milling Machine-led reflow oven,reflow soldering,reflow oven,lead free reflow oven,smt reflow oven,pcb reflow soldering,SMT Pick and Place Machine,SMT Production Line

Home >> Products >> PCB Depaneling Machine

Products

News

Contact Us

E-mail：caojun@hk-yush.com

Mobile：+86-13450659407

Tel：+86-0512-62751429

Address：Building H, GuoRui Pioneering Park, No. 1068 Jinyang East Road, Lujia Town, Kunshan, Suzhou.

Desktop PCB Router Milling Machine

Classification：PCB Depaneling Machine

Model：YS-300

Inquiry

In line 2 way Sliding Exchanger PCB Router Desktop PCB Router Milling Machine - Desktop PCB Router Milling Machine Manufacturers, Suppliers and Exporters on hk-yush.com Electronics Production Machinery

Features:

1. Adopting the collect dust downside mode, in line with the theory of free fall, the dust collecting effect is good.

2. Special fixtures are more securely fixed to avoid cutting accuracy errors caused by poor basic positioning.

3. The system automatically corrects according to the installation position of the product to ensure high-precision cutting requirements.

4. Installed with a static eliminator to remove electricity, dust and air nozzles continue to work, to eliminate static electricity generated when high-speed spindle cutting, to avoid damage caused by static electricity, to avoid the accumulation of dust due to static electricity.

5, Use safety doors to reduce noise and dust and improve safety

6, The cleaner is equipped with a dust collection box (Maintenance can be arranged according to capacity cutting requirements or dust collection time).

Application

Suitable for split stamp hole PCB board and irregular joint PCB board

Technical Parameters：

Function Items	Hardware Demand
Model	YS-300
Dimension	L623W737H587mm
Power	220V/50HZ
Machine power	3.6KW
Weight	About 300KG
Cleaner Dimension	Inside / L650W500H550mm
Cleaner Wattage	2.2KW/220V
Table Dimension	260mm*260mm
Cutting Speed	0-100mm/s
X,Y,Z axis Driving Speed	X, Y axis 0-1000mm/s (min), Z axis 0-750mm/s (min), servo motor drive
Repeatability Accuracy	±0.01mm
Working Area	X:0-260mm,Y:0-260mm,Z:0-80mm
PCB Thickness	0.5-5mm
Router Bit Diameter	0.8-3.0mm
Cutting Precision	±0.01mm
Cutting Ability	Linear, Circular, U-curve, Arc, L-curve
Cutter Change	Manual, tools needed
Cutter Attrition System	The number of milling cutters (0-5 section)
Cutter Break Detection	none
Cutter Life Control	controlled by Program
Table Number	1pc
Spindle Speed	60000rpm
Spindle Cooling System	Air cooling mode
Cleaner Mode	collect dust downside
Working Power	220V ,50HZ
Air press	0.4Mpa
Safety Device	Safety door and door lock sensor
Mode	offline, load and unload PCBA by hand
Auto failure test and repair mode	Self-diagnosis,display failure information in real time, query IO state visually, easy for troubleshooting
Computer & Operation system	IPC, Windows 7
Program Backup	USB
Software access control	Password protection,the operator enter corresponding interface according to authority to protect important parameters.)
Programming	Visual interface, the cutting point capacity for a single program should be over 400, dynamic simulation of cutting schedule
Auto correction of the mark point	Yes
Fixture	universal fixture
Voice control	≤78 dB(measured in 1M’s distance )
Maintenance Period	1 years
Technology Support	(Offer service of operation, programming, hardware caring and maintenance training; free upgrade of application. )