SMT reflow oven soldering technical requirements and standard indicators

SMT reflow oven soldering technical requirements and standard indicators

SMT reflow oven soldering is an important component used in the smt reflow oven process. Many friends who have purchased a SMT reflow oven soldering do not know the relevant indicators of SMT reflow oven soldering. In response to this situation, the following will introduce the operation and usage instructions of SMT reflow oven soldering.

Specification specifications for SMT reflow oven soldering:

1. The temperature control range meets the specifications in the manual, and the control accuracy is within ± 2.0 ℃;

2. The speed control meets the specifications in the manual, and the accuracy is controlled within ± 0.2m/min;

3. The lateral temperature difference of substrate movement (≤ 150mm spacing) is within ± 2.0 ℃;

4. The appearance of the heater is complete and the electrical connection is reliable. The hot air fan operates smoothly and without noise;

5. The guide rail can be adjusted freely and kept parallel. The effective width of the transmission substrate meets the specifications in the manual;

6. The operating system is working normally, the appearance of the instruments and meters is intact, the indications are accurate, the readings are eye-catching, and they are within the qualified service life;

7. The electrical equipment is complete, the pipelines are arranged in an orderly manner, and the performance is sensitive and reliable;

8. Regular maintenance inside and outside the equipment, free from yellow robes and oil stains.

That's all for introducing the basic indicators of SMT reflow oven soldering. In addition, the editor mentioned the need for regular maintenance, which many friends do not pay attention to. In fact, regular maintenance can not only better use SMT reflow oven soldering, but also extend its service life.